You drive your car almost every day, but are you putting the right performance coolant products in it? Whether it’s summer or winter, having peak coolant products in your vehicle is important. The purpose of coolant (otherwise known as antifreeze) is to prevent overheating in the summer and freezing in the winter.  Most coolant is a 50/50 or 70/30 mix of water and glycol chemicals. Knowing what to buy for your car takes some research.

No matter if it’s low or high temperatures, antifreeze is a much-needed component. Here are a few of the most important things to look for when purchasing performance coolant products for your vehicle. 

Performance Coolant Products Compatibility

First things first when it comes to following your handy dandy coolant replacement guide — compatibility. 

The coolant you buy must be compatible with your vehicle’s engine. It seems simple enough, but how do you know what coolant? 

An easy hint lies with the color of the old coolant in the engine. Variations of colors can range from pink, to red, orange, blue, green and yellow. Usually, older vehicles use green coolant and the rest of the vehicle brands have specific colors associated with them (i.e. Ford, Chrysler, Audi, KIA, etc.). 

When all else fails, check your owner’s manual. This booklet will have helpful coolant replacement tips. 

Freezing and Boiling Points

Knowing the freezing and boiling points of your coolant is second in line. These temperature readings will tell you what temperatures you can use the coolant at. 

Think quality when it comes to this. Choosing a coolant that has a higher boiling point as well as a lower freezing point is ideal. The more versatile the performance coolant products the better. 

We all know that pure water has a boiling point of 212 degrees Fahrenheit and a freezing point of 32 degrees. With coolant, 50/50 mixes have a -35 degree freezing point and a 223 degree boiling point. Even further, 70/30 have a freezing point of -67 degrees and boiling point of 235. 

These temperatures seem far out there, but sometimes performance coolant products can reach 250 to 275 degrees. The cooling system uses pressure to continue to raise the boiling point of the coolant, saving your vehicle by raising the pressure limit and in turn the boiling point.

Performance of Various Brands

When it comes to choosing your brand of performance coolant products, you have to finally consider the performance of your vehicle. 

Each vehicle engine is different and needs different coolant qualities. Making sure there are no hot spots, pre-ignition, engine knocks limits overheating problems. Trust a brand like PEAK OET Coolants to help you capitalize on the performance of your vehicle.